# Conversion of measurement unit ADEUNIS Pulse

**URL:** <https://community.cumulocity.com/t/conversion-of-measurement-unit-adeunis-pulse/708>\
**Category:** Forum\
**Tags:** cumulocity\
**Created:** [August 22, 2023, 12:56pm UTC](https://community.cumulocity.com/t/conversion-of-measurement-unit-adeunis-pulse/708 "2023-08-22T12:56:27Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![tarek.ajdid](https://avatars.discourse-cdn.com/v4/letter/t/278dde/32.png) [@tarek.ajdid](https://community.cumulocity.com/u/tarek.ajdid)\
**Post date:** [August 22, 2023, 12:56pm UTC](https://community.cumulocity.com/t/conversion-of-measurement-unit-adeunis-pulse/708/1 "2023-08-22T12:56:27Z")

</div>

How can I convert a device measurement ?

I use an Adeunis pulse device. This device send a measurement in “pulse”.

I would like to convert this measurement in “m3”.

I would like a solution without coding.

thx for your response

Tarek

---

<div class="post-metadata">

**Author:** ![Christian\_Herzog](https://dub1.discourse-cdn.com/flex005/user_avatar/community.cumulocity.com/christian_herzog/32/32209_2.png) [@Christian\_Herzog](https://community.cumulocity.com/u/Christian_Herzog)\
**Post date:** [August 22, 2023, 1:20pm UTC](https://community.cumulocity.com/t/conversion-of-measurement-unit-adeunis-pulse/708/2 "2023-08-22T13:20:07Z")

</div>

There is no out-of-the-box solution.  
Either you program a microservice which does the wanted measurement conversion.  
Or you try the conversion using Apama by capturing incoming measurements, applying the respective conversion logic, and create new converted measurements.  
Regards, Christian

---

<div class="post-metadata">

**Author:** ![tarek.ajdid](https://avatars.discourse-cdn.com/v4/letter/t/278dde/32.png) [@tarek.ajdid](https://community.cumulocity.com/u/tarek.ajdid)\
**Post date:** [August 22, 2023, 1:51pm UTC](https://community.cumulocity.com/t/conversion-of-measurement-unit-adeunis-pulse/708/3 "2023-08-22T13:51:28Z")

</div>

Is it possible with smartREST Templates in user interface ?

---

<div class="post-metadata">

**Author:** ![Kai\_Reinhardt](https://dub1.discourse-cdn.com/flex005/user_avatar/community.cumulocity.com/kai_reinhardt/32/18493_2.png) [@Kai\_Reinhardt](https://community.cumulocity.com/u/Kai_Reinhardt)\
**Post date:** [August 28, 2023, 12:11pm UTC](https://community.cumulocity.com/t/conversion-of-measurement-unit-adeunis-pulse/708/4 "2023-08-28T12:11:19Z")

</div>

Hi Tarek

take a look at [Conversion of Measurement Unit](https://community.cumulocity.com/t/conversion-of-measurement-unit/793)

Regards

Kai

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/community.cumulocity.com/system/32/31990_2.png) [@system](https://community.cumulocity.com/u/system)\
**Post date:** [February 24, 2024, 12:11pm UTC](https://community.cumulocity.com/t/conversion-of-measurement-unit-adeunis-pulse/708/5 "2024-02-24T12:11:38Z")

</div>

Closed on February 24, 2024, 12:11pm UTC

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.