# Sending multiple measurements for the same device via MQTT

**URL:** <https://community.cumulocity.com/t/sending-multiple-measurements-for-the-same-device-via-mqtt/3878>\
**Category:** Forum\
**Tags:** cumulocity\
**Created:** [June 11, 2020, 9:23am UTC](https://community.cumulocity.com/t/sending-multiple-measurements-for-the-same-device-via-mqtt/3878 "2020-06-11T09:23:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![evren\_okcu](https://avatars.discourse-cdn.com/v4/letter/e/c5a1d2/32.png) [@evren\_okcu](https://community.cumulocity.com/u/evren_okcu)\
**Post date:** [June 11, 2020, 9:23am UTC](https://community.cumulocity.com/t/sending-multiple-measurements-for-the-same-device-via-mqtt/3878/1 "2020-06-11T09:23:28Z")

</div>

Hi,  
I’ve tried to send multiple measurements of the same device/sensor using template 200, but I’ve noticed that only one of the measurements is recorded by Cumulocity IoT.

Is it possible to achieve it via MQTT? or should I use the rest interface?

Thanks for your support.

---

<div class="post-metadata">

**Author:** ![Gyan\_Awasthi1](https://avatars.discourse-cdn.com/v4/letter/g/eada6e/32.png) [@Gyan\_Awasthi1](https://community.cumulocity.com/u/Gyan_Awasthi1)\
**Post date:** [June 22, 2020, 2:23am UTC](https://community.cumulocity.com/t/sending-multiple-measurements-for-the-same-device-via-mqtt/3878/2 "2020-06-22T02:23:02Z")

</div>

Yes, in principle, It is possible via MQTT. Not sure, why were you not getting all measurements?  
From provided info, it is not clear how are you sending measurements.

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/community.cumulocity.com/system/32/31990_2.png) [@system](https://community.cumulocity.com/u/system)\
**Post date:** [April 2, 2021, 3:44pm UTC](https://community.cumulocity.com/t/sending-multiple-measurements-for-the-same-device-via-mqtt/3878/3 "2021-04-02T15:44:48Z")

</div>